Hits: 1930 img
Fumed silica is the default reinforcing filler for high-performance silicone rubber — and often the most expensive line in the raw material list. IOTA FINE SIL 7518 is a superfine precipitated silica made by a special processing technology, developed for one specific job: replacing all or part of fumed silica in silicone rubber compounds, without giving up the properties that made you choose fumed grades in the first place.
What the plant data shows
Years of production practice with IOTA FINE SIL 7518 show it can fully or partly replace expensive fumed silica in silicone rubber formulations, significantly reducing formulation cost while maintaining:
Technical data
|
ITEM |
IOTA FINE SIL 7518 |
|
SiO2 (dried) |
≥90 % |
|
Moisture |
4–8 % |
|
Sulphate |
≤1.0 % |
|
pH value |
6.5–7.5 |
|
Iron content |
≤300 mg/kg |
|
BET |
200–220 m²/g |
|
Particle size |
5 μm |
|
Packing |
15 kg white kraft paper bag |
How to run the replacement trial
Start by replacing 30–50 % of the fumed silica loading in your existing HTV recipe, keep the structure-control agent (e.g. hydroxyl silicone oil) ratio, and compare tensile strength, hardness and post-stretch whitening against the control. Because BET 200–220 m²/g sits in the same surface-area window as many standard fumed grades, the rheology shift is usually manageable — the compound cost, however, moves in the right direction.
For a transparent or insulation-grade compound where failure modes are more demanding, combine 7518 with IOTA FINE SIL 7523 (deionized treatment) — see our previous selection guide.
Full specifications → https://www.iotasilica.com/product-precipitated-silica-iota-fine-sil7518.html