Matte Finish but the Color Looks Dull? Why the Untreated, Low-Pore Silica Keeps the Shade True — IOTA FINE SIL 7516

Hits: 1928 img

Every matting agent is a trade-off. Cut the gloss, and the same powder that scatters light can also swallow binder and pigment — the finish goes matte, but the shade goes grey, pale and flat. In coatings where the color itself is part of the spec, that trade-off is unacceptable.

One series, three grades — and the choice is pore volume plus surface treatment. IOTA's ink and print coating matting series carries three grades built on the same gel process and the same narrow particle size distribution: FINE SIL 7300B (pore volume 2.0 ml/g, untreated), FINE SIL DC7300 (pore volume 2.0 ml/g, special surface treatment) and FINE SIL 7516 (pore volume 1.5 ml/g, untreated). The big-pore grades earn their place where the coating must absorb something — ink, for example. 7516 is the grade for the opposite priority: when nothing needs to be absorbed, but the color of the film must stay true.

Why low pore volume protects the shade. A lower pore volume means less resin and less colorant drawn into the particle structure, so more of the pigment stays where it should be — in the film, at full concentration. Combined with the narrow particle size distribution that keeps extinction efficiency high, 7516 reaches the target gloss without the washed-out look that over-absorbing matting agents produce. And because the surface is untreated, no surface-modifying chemistry interferes with the formulation's own additive system.

Specifications (IOTA FINE SIL 7516):

  • Particle size: 3.0-4.0 µm
  • SiO2 (dried): ≥ 98%
  • Oil absorption: 2.4-2.5 cm³/g
  • Pore volume: 1.5 ml/g
  • pH (5% suspension): 6-8
  • Moisture: ≤ 5%; loss on ignition: ≤ 6%
  • Surface treatment: none

Where it fits: industrial and print-related coating systems where matte appearance and color reproduction must be delivered together — and where the anti-blocking or ink-absorption functions of the treated, high-pore grades are not required.

If your matte panel measures the right gloss but the customer says the color "went grey," stop raising the pigment — check the pore volume of the matting agent first.

Product page: www.iotasilica.com/product-matting-agent-for-ink-print-coating-.html

Online QQ Service, Click here

QQ Service

What's App