The difference between silicone and silicone rubber The application of silicone rubber has been extensive, but the understanding and distinction bet......
2019-07-23The magical effect of fumed silica in silicone rubber Fumed silica is one of the most important high-tech ultra-fine inorganic new materials. Due to its sm......
2019-07-23As a new consumer electronic product, electronic cigarette is not only a simple combination of heating components, batteries and control board......
2019-07-23Since white carbon black has transparency, high reinforcing property, and good adhesion, it is widely used in the manufacture of rubber products such as transparent, translucent, light-colored, and ......
2019-07-22The white carbon black has decomposition or adsorption effect on the accelerator, and the addition of the surfactant can reduce the decomposition and adsorption of the white carbon black to the accele......
2019-07-22The influence of the filling amount of silica on the physical properties of rubber is very important. Generally, as the filling amount increases, the tensile strength, tear strength, tensile strength,......
2019-07-22Silica is one of the inorganic fillers. Since the affinity of the inorganic filler to the rubber-based organic polymer is lower than that of the carbon black, the white carbon black is difficult to be......
2019-07-22Silanol groups and siloxane groups on the surface of silica, these groups are easy to adsorb moisture. Appropriate moisture can prevent coagulation between the white carbon black particles. When the r......
2019-07-22Surface chemistry includes an H, -OH group, pH, moisture, ignition loss, and the like. The surface chemistry of silica has a great influence on the physical properties and vulcanization rate of the ru......
2019-07-22The structure of silica is characterized by the size of the voids between the morphology of the primary structural monomer (aggregate) and the aggregate of the secondary structure. The change of the ......
2019-07-22The size of the specific surface area is determined by the particle size of the silica. The particle size of the filler refers to the diameter of the primary aggregate and is one of the most important......
2019-07-22From the appearance point of view, domestic products are mainly divided into three structures and compositions, which are powdery, microbeads and large particles. Whether in the form of large particle......
2019-07-22Silica, like carbon black, can be divided into flocs, aggregates, and aggregates (or monomers). Monomers, also known as primary structures or raw particles, are rarely present in the form of monomers.......
2019-07-22The agitating ball mill refers to a kind of ultra-fine grinding equipment consisting of a static cylinder filled with grinding medium and a rotary agitator. The fineness of the product can be as fine ......
2019-07-20The mechanical impact type ultra-fine pulverizer is a super-fine pulverizing equipment selected by the domestic non-metal mining industry. The fineness of the product can generally reach d97=10μm, so-......
2019-07-20