1. Adhesive tape should be stored in the warehouse to avoid sunshine and rain. Contact with organic solvents of acid-base oil should be prohibited and kept clean and dry. The room temperature should be between - 15 C and 40 C away from the discovery device 1 m.

2. The tape should be placed in rolls and not folded. If the storage time is too long, the tape should be turned once a quarter.

3. When loading and unloading conveyor belts, it is better to use cranes and ropes with beams to lift smoothly, so as to avoid damaging the edges of the belts, and not to load and unload roughly, causing loose roll and fling sleeves.

4. The type and specifications of the tape should be selected reasonably according to the needs and specific conditions.

5. It is forbidden to use different types, specifications, models, strengths and layers of tape together.

6. Conveyor belt joints should be bonded by thermal vulcanization to improve reliability and maintain high effective strength.

7. The diameter of the conveyor roller and the minimum diameter of the conveyor belt should conform to the relevant regulations.

8. Do not make the tape snake or creep. Keep the tow rollers flexible and the tension force moderate.

9. When conveyors are equipped with baffles and cleaning devices, wear and tear of tape should be avoided.

10. Cleanness is the basic condition for good operation of tape. Foreign material will affect the eccentricity, tension difference and even fracture of tape.

11. When early damage of adhesive tape is found in use, the causes should be found and repaired in time to avoid adverse consequences.