Ketone oxime transparent glue (including light-colored glue) will turn yellow to varying degrees after curing for about twenty days, and the yellowing tendency will increase with the increase of time.......
2020-03-03This kind of situation occurs more frequently during vertical seam sizing. The reason for this analysis should be that the initial wetting time of the glue is slower on the surface of the substrate, t......
2020-03-03After the real rubber strip is cured, there are very few intermediate cracks. Because there are too few cases, it is not very clear about some objective conditions, so it is impossible to accurately d......
2020-03-03Firstly, the objective conditions of sizing have a great influence on the deep curing speed. Such as the construction environment, temperature, and humidity have a relatively large impact on the curin......
2020-03-03This situation is mainly caused by the following two reasons. First, the storage temperature is too low: if the acid glue (especially low-grade glue) is stored at a lower temperature, a lot of bubb......
2020-03-02There are two reasons for this problem, which are related to both glue and bottle. First, the reason for the glue. Except for a few high-end rubbers, other acid rubbers on the market now add a cert......
2020-03-02The common places where glass glue is used in home furnishings are: dumb mouths on the back of wooden lines, sanitary ware, toilets, toilet mirrors, gaps between sinks and walls, gaps between wooden d......
2020-03-02The use of silicone glass glue is subject to the following restrictions: 1. Construction should not be carried out in places subject to long-term soaking; 2. It is not compatible with materials that......
2020-03-02The full name of glass glue is silicone glass glue, which is similar to an ointment. Once it contacts the moisture in the air, it will solidify into a tough rubber-like solid material. Silicone glass ......
2020-03-02The pressure on market competition will be even greater in 2019. How to establish a foothold in a traditional rubber industry? Ordinary traditional rubber products are in a saturated state in China. H......
2020-02-29Definition of anticorrosive coating: Anticorrosive coating refers to a class of liquid or solid materials that can form a film under certain conditions to protect, decorate, or other special functions......
2020-02-29⑤ Rubber, elastomer As the market demand for the manufacture of various colors of artificial rubber other than black grows, and it is required to have mechanical properties similar to carbon black fo......
2020-02-29③Wire and cable Vinylsilane has been used for cross-linked polyethylene homopolymers and copolymers since the 1970s, as insulation materials and sheaths for wires and cables, and suitable for high te......
2020-02-29① Paint and ink Coatings using silane coupling agents have the following advantages: 1.Corrosion resistance 2.Improve adhesion 3.Improve rheology 4.Improve the dispersibility of dyes and fillers ......
2020-02-29The overall blending method is to mix the silane coupling agent stock solution into the resin or polymer before the filler is added. Therefore, it is required that the resin or polymer should not reac......
2020-02-28